Sourcing Slides and Netting

DJK555 wrote:
I recently purchased a 2008 Komfort 232 trailer and am in the process of modifying a few things to suit how we use an RV. A couple of items that i am trying to source. The factory had installed a pull out drawer under one of the dinnet seats. A great feature that I am duplicating under the second seat. I'm trying to find bottom mount cabinet drawer slides that are 36" to 38" long with a lock feature that requires you to lift up on the drawer before sliding out. I am also converting a couple of open( TV mount and microwave opening)spaces to storage and would like to use netting across the opening. Has any9one come across these items preferably in Canada?
Thanks in advance.
David

Use standard drawer slides and mount them on the SIDES of the drawers as they are designed to be.

For the drawer lock, you simply place a block of wood or make a bent piece of metal to mount UNDER the drawer. The block of wood or metal piece only needs to extend SLIGHTLY below the drawer. The block of wood or metal needs to have an angle to make it easier to close (the angle allows the drawer to "climb" over the bottom of the drawer opening).

The idea is the wood or metal will "catch" on the inside bottom of the opening.

When done correctly you simply "lift" the drawer up slightly and pull out.

Standard side drawer slides WILL need to be used since they allow nearly a 1/4" of upward movement..

Cost is free to make and no shipping involved!

On edit.. Adding some pictures of my home made drawer catch..

Drawer "catch" view


Side veiw of drawer slide


Hope that helps!