where to put volt/amp meter in circuit
looking to install meter near WFCO. Currently, it is wired with RED & White into meter > WFCO and only reads AMPS when plugged into shore. Can someone please look at circuit diagram and tell me whic...
Forum Discussion
ALso be sure the battery is connected up properly. It is so easy to reverse the connection. FInd the WORD "NEG" or the symbol "-" on the battery case and make sure the lead from this terminal is going to FRAME GROUND.
If you go the terminals swapped just for a sec the REVERSE POLARITY and IN-LINE fuses (ALL THREE) will blow. Correct the problem first if they are blown otherwise the new fuses will just blow again on you.
Roy Ken
If you go the terminals swapped just for a sec the REVERSE POLARITY and IN-LINE fuses (ALL THREE) will blow. Correct the problem first if they are blown otherwise the new fuses will just blow again on you.
Roy Ken
