13" High 5th Wheel Slider Hitch??
Just purchased our first 5th wheel. TV is a '16 Ram 3500 SRW short bed (completely stock). Pin weight is approx. 2500 lbs. Temporarily using a non-slider 5th wheel hitch that's adjusted to its lowe...
Forum Discussion
otrfun wrote:
Here's our Ram 3500 (short bed) with 6-8 in. still remaining between the truck cab and the 5th wheel's front cowling using a standard, no slider hitch. The rear of the kin pin assembly was about 2" away from the right side bed rail.
This appears to us like more than enough turning angle for the vast majority of situations. Thoughts? Opinions?
Thanks!
Should be plenty, just take your time and take another cut with the steering wheel when needed. I don't use a slider and have not had a situation that needed one in 26+ yrs
