Forum Discussion
RollandB
Aug 09, 2018Explorer
First important thing, measure your trailer on a level surface with the raider hooked up. My high point is not the AC the factory installed, but the vent cover in the bathroom I installed.
Second important thing is where the height of the low bridge or tunnel is measured from. What isn’t known is it’s accuracy.
Third and this applies mostly for tunnels is where it’s low point is. Many tunnels in our area point to the low spot which is usually the curved part towards the side. I also know the height of my side as well and keep both written down in the center console with my last numbers when weighed
Second important thing is where the height of the low bridge or tunnel is measured from. What isn’t known is it’s accuracy.
Third and this applies mostly for tunnels is where it’s low point is. Many tunnels in our area point to the low spot which is usually the curved part towards the side. I also know the height of my side as well and keep both written down in the center console with my last numbers when weighed
About Fifth Wheel Group
19,006 PostsLatest Activity: Jan 29, 2025