1988 Skyline Aljo Rebuild/Resto
Hey guys! I thought I would introduce my latest RV project. We purchased this little gem to get introduced to the 5er world. I will update as I get things done. For now I’m just gonna show what we s...
Forum Discussion
Let's update where I am in the process. The first job I tackled was to repair the rusted out fender-wells. During my first inspection with the water connected, I discovered the kitchen sink baskets were leaking. So to facilitate working on the fender-well (which is partly under the sink), I decided to remove the sink. More on that later.
The fender-wells were galvanized steel, which is great, but this one did not survive the leaks it was subjected to. I was able to slavage part of the fender-well, but most was rebuilt. At the same time, I replaced parts of the rotten wall plates I discovered.
Unfortunately, I do not have any pictures of any of this, as I was not planning on blogging about it at the time. I'll post more details of what I have done soon.
The fender-wells were galvanized steel, which is great, but this one did not survive the leaks it was subjected to. I was able to slavage part of the fender-well, but most was rebuilt. At the same time, I replaced parts of the rotten wall plates I discovered.
Unfortunately, I do not have any pictures of any of this, as I was not planning on blogging about it at the time. I'll post more details of what I have done soon.
