2 year old 15k dometic A/C just bit the dust
Well my main A/C just quit cooling. The unit is out of warranty. The compressor still comes on but the unit does not blow cold (not hot but just barely cool) I see amazon has these units new for abou...
Forum Discussion
Dirtclods wrote:
requires welding a bung on ? Would it be possible since it already low to drill it out and tap it then thread an adaptor on it?
no, there are no threaded fittings. When built these units, like your home refer. are sealed after the charge is weighed in. There's a short stub of copper coming off the compressor that has solder in the end, that's where the factory charges it. They have a special dodad that does it and seals/solders after the charge is added. You have to drill a hole and braze in a Schrader valve in the suction line. If the system is totally flat then there's a leak (mine wore a hole through the copper where it went through a bulkhead). Unlike auto AC these units should NEVER need to have refrigerant added or changed, again just like your home refer.
