Forum Discussion
crickeydog
Aug 26, 2014Explorer
It's called launch shudder. Our DRW Ford and Dodge 3500's shudder too when towing. It's physic's and I won't even begin to try and explain it. IMHO there's two ways to eliminate launch torque shudder; one's free and the other will set ya back a few bucks.
First, slowly ease into the throttle from a dead stop. That's a lot of mass and weight your engine and tranny has to overcome from a dead stop...give both some time to get the load up and moving before rolling into the throttle to accelerate.
Second, I found that adding a set of traction bars and a tranny brace also helped. I had them painted to match the truck...and they look kinda cool too.
Happy camping!!! See y'all down the road!!!:)
First, slowly ease into the throttle from a dead stop. That's a lot of mass and weight your engine and tranny has to overcome from a dead stop...give both some time to get the load up and moving before rolling into the throttle to accelerate.
Second, I found that adding a set of traction bars and a tranny brace also helped. I had them painted to match the truck...and they look kinda cool too.
Happy camping!!! See y'all down the road!!!:)
About Fifth Wheel Group
19,006 PostsLatest Activity: Jan 29, 2025