3-step entry unit broken

Stromberg-Carlson makes a direct replacement 4-step. Did it to mine and it worked great.

bigdon68

thanks all--I'll do the bolt with a couple of fender washers for space/sliding application.

Have a Great Turkey Day!

Larry

ScottG wrote:
Replace the rivet with a nylock nut and bolt so that you don't have to make it tight but it will be loose enough to allow movement.

X2
Don

flamingstar wrote:
I repaired my broken rivet with a ¼ inch x 1 ½ inch long galvanized carriage bolt

After removing the broken rivet I inserted the bolt from the outside of the step/hinge through the plastic spacer and installed a ¼ inch washer and ¼ inch lock nut on the other side. Works perfect.

X2

Replace the rivet with a nylock nut and bolt so that you don't have to make it tight but it will be loose enough to allow movement.

The steps are all very much the same size.
I've never seen any replacement parts, flamingstar fixed his with a bolt, I fixed mine with a chunk of angle-stock and my welder.

More than likely kwikee. But either should fit.

I repaired my broken rivet with a ¼ inch x 1 ½ inch long galvanized carriage bolt

After removing the broken rivet I inserted the bolt from the outside of the step/hinge through the plastic spacer and installed a ¼ inch washer and ¼ inch lock nut on the other side. Works perfect.

Either a Kwikee step or Stromberg-Carlson

Sorry but no. Unless someone does know I would look for Forest River online and call corporate.