JIMNLIN wrote:
Having made a living using them all I prefer a 3/4 ton HD which can handle 3000-3400 lb of load in the bed safely/legally. BTDT.
Never saw the need for a one ton SRW which depending on truck brand may not have any more in the bed payload than the 3/4 ton HD.
Everyone has their likes/dislikes in truck sizes which is fine with me.
Any of the 3/4 ton truck will serve the OP with room to spare.
We are talking the OP just getting into towing a 5er and asking questions.
There is no physical difference in the truck size between a 3/4 ton and a one ton STW, so the smart money is on getting the one ton.
It has slightly stronger springs and a higher GVWR and Payload.
I carried a 5er 1,700# over GVWR for years and never felt unsafe, but I never told or encouraged others to do the same.
I went for a 3500 DRW, because with what we carry in the truck a 3500 SRW with out 2,700# pin would be within a couple hundred pounds or even over GVWR of 12,300#.