Andersen hitch question
I'm considering switching hitches to the Andersen. I read in the docs that the hitch can jam if the truck/trailer are out of level, compared to each other. So the question is, how sensitive is t...
Forum Discussion
ralphnjoann wrote:hbillsmith wrote:
As I understand your concern its relative to being able to line up on uneven ground sufficient to get the kingpin adapter hole to drop onto the Andersen ball in the truck bed. Fear no more! Andersen now offers their patented funnel adapter for the Ultimate hitch (for new owners it's free and included, current owners can get the funnel adapter for cost $33). The funnel let's your alignment be off by as much as 3" and still have the king pin slide on.
According to the Amazon description of this adapter, you will also need a new ball if your hitch was made before March, 2016.
New ball only required if you set ball to lowest position in hitch. I have one of these cupps o n order and didnt need ball as I run at highest setting. Per Andersen,it lets you be off by as much as 3 inchs.
I really don't have any trouble hitching just wanted it.
