Angle of toy hauler door is to steep?
The angle of the door is just to steep to load our Harleys without it catching the frame. Any ideas on what to use to fix this issue? What are you guys doing?
Forum Discussion
Place one or two 2x4 blocks under the ramp ground pads to raise the ramp up slightly; bike should have no issue climbing a small 'curb' to get onto the ramp.
Stand up off of the bike as you breakover to the trailer floor (to take load off of the suspension.
Lift the nose of the trailer some to reduce the breakover angle, or place truck rear tires on blocks/ramps to lift front of trailer.
Stand up off of the bike as you breakover to the trailer floor (to take load off of the suspension.
Lift the nose of the trailer some to reduce the breakover angle, or place truck rear tires on blocks/ramps to lift front of trailer.
