Axle Spindle Nut Wrong
I have a 2013 Arctic Fox 27-5L which has been setting beside the house for 4 years unused due to illness and many other things. Long story short I am repacking wheel bearings to start with, also looki...
Forum Discussion
I've run into this before also. The hole for the cotter pin was not centered. Previous owner had bent the cotter pin into an arc to force it in. The nut only had 6 slots. I went to NAPA and got nuts with 12 slots to allow the key to pass thru easily matching the offset of the hole. Visualize using the slots at 5 and 12 instead of 3 and 6.
