Battery Switch and Brake breakaway protection
I've finally decided to install a battery cut-out switch in my Copper Canyon. It seems simple enough - put the switch between the battery and the junction block where the Positive lead is attached to...
Forum Discussion
Do you have just 2 wires on the 'switch'?.....should be BLUE.
One goes to battery + and other ties into line going to brakes from umbilical cord (blue)
3 wires on 'switch',,,,,,,,,white is ground (frame), black is battery + and blue (umbilical cord)
Probably need to access umbilical cord connections........my overhang has access panel next to pin box........and check how 'switch' is wired
One goes to battery + and other ties into line going to brakes from umbilical cord (blue)
3 wires on 'switch',,,,,,,,,white is ground (frame), black is battery + and blue (umbilical cord)
Probably need to access umbilical cord connections........my overhang has access panel next to pin box........and check how 'switch' is wired
