Beef up (fish plate) “I” beam frame
Dealer told me some people have done this. Adding 10 or 12 feet of plate centred over axels. This should prevent rear frame sag which I think my 34 foot Cedar Creek has some of. Thoughts?
Forum Discussion
Me Again wrote:ivbinconned wrote:
Well you all have convinced me to do this.
I will use 3/16 plate 12 feet long min. I’ll jack the back end up a hair if need be to true it up.
Thanks for your comments.
Be sure to skip weld it! Chris
You do mean stitch weld it :)
