Buffing/Compounding Info Needed
My unit is 9years going on 10years old and the decals on the cap are getting shabby. I had to remove one and found the gel coat under the decal looks like new and very shiny. The rest of the cap show...
Forum Discussion
boatscr wrote:
I would like to dull the shiny part to blend in with the rest of the cap. Can anyone with experience recommend the right grit compound to do this job?
Use 1000 grit wet or dry and use with sanding block, and water (3 gals) with a little (1 tsp) liquid detergent in it. Back and forth in one direction, then back and forth at 90* to original strokes. Don't use much pressure.
