Delamination on '09 Sierra
I have some delamination on the rear of my 2009 Sierra by Forest River. I have seen videos on injecting epoxy and clamping to remove bubbles. I'm not sure how well that would work on mine. What would ...
Forum Discussion
First thing is determining if the outside skin is bonded to a honeycomb structure or bonded to luan sheeting.
My 5er in sig had a small area on the side upper front corner that the filon had delamed (2' area) from the luan backing. I drill holes in the filon per service guys recommendations and injected adhesive he gave me. The trailer sat in a barn so I was able to use the side of the barn to jack a piece of plywood against the work area.
I haven't done a google/youtube on the subject but there should be lots of input on delam issues and how each job was done.
My 5er in sig had a small area on the side upper front corner that the filon had delamed (2' area) from the luan backing. I drill holes in the filon per service guys recommendations and injected adhesive he gave me. The trailer sat in a barn so I was able to use the side of the barn to jack a piece of plywood against the work area.
I haven't done a google/youtube on the subject but there should be lots of input on delam issues and how each job was done.
