Forum Discussion
CHV_FRK
Jul 09, 2013Explorer
Are you ever going to be close to the manufacturing facility? You could push the isse with them. If not, I think you may be best going to an actual trailer (semi) repair on the pin issue.
On our trailer I cleaned the roof this weekend and it appears that the "white has come off in about 40%. It's manilla colored so I'm not sure if that's the rubber or what? Any input? I thought it would be black underneath. Not sure where I go from here. At need to contact Jayco as I have done yearly maintenance.
I also had a blowout a few weeks ago. No warning and an internal belt failure. Good amount of damage that need to repair. Looking at posts it appears that there may have been a bad run around April of 07. FYI. Has anyone here looked at 17.5" wheels and tires? It's a little more but I get new wheels as well.
On our trailer I cleaned the roof this weekend and it appears that the "white has come off in about 40%. It's manilla colored so I'm not sure if that's the rubber or what? Any input? I thought it would be black underneath. Not sure where I go from here. At need to contact Jayco as I have done yearly maintenance.
I also had a blowout a few weeks ago. No warning and an internal belt failure. Good amount of damage that need to repair. Looking at posts it appears that there may have been a bad run around April of 07. FYI. Has anyone here looked at 17.5" wheels and tires? It's a little more but I get new wheels as well.
About Fifth Wheel Group
19,031 PostsLatest Activity: Dec 16, 2025