Does anyone else own the 2012 Attitude FL28AKLG

BobWanderer wrote:

stsmark wrote:
There is not a bad apple in the bunch.
Enjoy

Only problem with the Forest River rigs, 15" tires :S

Also they have a RV queen.... :(

The Attitude has a full queen

While it is possible to change out the counter top, the collateral damage caused during removal would probably out way the benefits. The counter tops are typically permanent (adhesives, staples, screws, bolts, etc). The tables do not get the upgraded surface.

Bakersfield wrote:
Be sure to post the finished pictures. From what I understand, yours is the first FL28AKLG to ship with the slide out.

Also, I found a Trailer Owner Pre Delivery Inspection (PDI)sheet link

Thanks I will definately use that inspection sheet. From what I understand now is that two have already shippes somewhere. I think one went to fresno. The one that was already being built does not have the solid surface counter tops. Is that the counter in the kitchen only or does the tables get changed out also. Is it expensive or hard to upgrade that later.?

Be sure to post the finished pictures. From what I understand, yours is the first FL28AKLG to ship with the slide out.

Also, I found a Trailer Owner Pre Delivery Inspection (PDI)sheet link

Thanks for the input. I did get the info I needed today from them and was very helpful. Only thing im waiting on now is the dealer to get the RV from eclipse. I was hoping to get it this weekend so we will see if it turns out. I will take some measurements when I get it if you dont get your info firtst.

Bakersfield wrote:
Call the factory and ask for Bob in Sales. He can get you the information, but I know the engineering department is backed up. I am still waiting on the measurements/dimensions for the new slide out. I have heard good things about Eclipse’s service department, and they are one of the few manufactures (still in business) that are willing to do repairs. From everything I have read, seen and heard, they are on the up and up.

I agree..... Call and talk to them.
Bob can sometimes be hard to get ahold of and usually I will settle for one of the other guys who are available.
I have emailed in the past and have NEVER got a response from them.
I have always got good info from the half dozen of so times I have called to ask questions before I bought one.
Also, I have always gotten a call back when they have to do some research to find the info I requested.

Call the factory and ask for Bob in Sales. He can get you the information, but I know the engineering department is backed up. I am still waiting on the measurements/dimensions for the new slide out. I have heard good things about Eclipse’s service department, and they are one of the few manufactures (still in business) that are willing to do repairs. From everything I have read, seen and heard, they are on the up and up.

danojeno wrote:
That's very cool, because with both tables in, it can get a little tight through there.

Yeah I did notice this when we looked at the non pop out so when they said they were doing the pop out it was a pretty big selling point.

What do you guys think of eclipse's service? Im probably getting over excited but not getting the fast response I was hoping for.

I got the superglide fifth wheel hitch and you have to get a capture plate. Not getting info for the lippert pin box being used to get the capture plate to go with it. Does anyone here know what lippert model they use for the pin box?

That's very cool, because with both tables in, it can get a little tight through there.

Not sure how to post pics on this forum yet so hope this works. Pics of the new floor plan with pop out.
Pictures