Davezogg wrote:
I bought a 2016 Ram 4x4 2500. We went from Illinois to Wisconsin (7 hours driving) to pick up our used 2008 5th wheel.
Well, the trailer is about 7 inches nose high and I was able to raise the pin all the way up and gained about and inc or a little more.
I have right at 6 1/2 inches between the bed rails and the bottom of the trailer.....so, good there.
So, even with the drop of the truck when hitched, its still going to be nose high...ugh
Never having had this issue before, I'm not sure what I am in for....and advice would be appreciated. I may flip the axles when I get home...400 miles away.
I was going to buy a 4x2 truck, but opted for a "great deal" that gave me the 4wd for free...ugh!
Please help!!
X-whatever on the axle flip before doing anything else. Also, make sure there are no extra holes in the spring and equalizer hangers to allow you to drop things.
Lyle
