Forum Discussion
babun
Oct 06, 2015Explorer
Your new clamps won't last too long if mounted the same as shown in your pic.
Note the cracks near the last screws holding into the body. This is causing
the clamp to bend from the flat sheet metal body side into a round tank shape.
Move the two mounting screws closer to the middle screw, allowing a less of a
shape bend of the clamp. Think like 9th grade math class......a tangent against
a circle...
Note the cracks near the last screws holding into the body. This is causing
the clamp to bend from the flat sheet metal body side into a round tank shape.
Move the two mounting screws closer to the middle screw, allowing a less of a
shape bend of the clamp. Think like 9th grade math class......a tangent against
a circle...
About Fifth Wheel Group
19,006 PostsLatest Activity: Jan 23, 2025