Fridge problems

If it has run off level much, it may be clogged up. If that happens, there's no amonia or other tell-tale signs.
I think you made the right choice.

Old-Biscuit wrote:

mudmaker wrote:
Found one at camping world. On the way to pick up and install today.

Lot of OTHER components could be the issue vs cooling unit

Blown fuse(s)
Bad circuit board
Dirty burners
Bad spark electrode
Etc etc etc etc


Did you even go thru the troubleshooting guide in manual LINKED


Never mind.......

So going to your troubleshooting page you provided, copying and pasting the part that pertained to my issues, going through each one and testing the unit in each circumstance and still not finding an answer.

mudmaker wrote:
Found one at camping world. On the way to pick up and install today.

I am guessing here but you did not know the answer to your question. that is ok but you are going to install the rear cooling system yourself?

chevman

mudmaker wrote:
Found one at camping world. On the way to pick up and install today.

Lot of OTHER components could be the issue vs cooling unit

Blown fuse(s)
Bad circuit board
Dirty burners
Bad spark electrode
Etc etc etc etc


Did you even go thru the troubleshooting guide in manual LINKED


Never mind.......

Found one at camping world. On the way to pick up and install today.

Could be internal contamination, a flake of rust or a little piece of solder floating around. One thing I've heard about is "burping" a fridge. Basically, remove the fridge, turn it upside down for 24 hours, then reinstall. It will either work, or it won't. If not, it's more'n likely toast. You can buy a replacement cooling unit for about $600-800, last I knew.

Lyle

Feel like I'm missing something or overlooking a step. I don't know though.

Oh and no yellow cake. Been looking for signs of that all morning. No smell either.

Ventilation yep, good breathing going on. Two fans running on and off via a thermostat
Leveling yep, its good.
Ambient Temperature about 68 outside
Air Leaks nothing to note
Thermistor checked. 9300 ohms
Cooling Unit ??? Don't know. Burner works. 120 element shows proper ohms.
I think I have everything but actual info on cooling unit. Thinking this is the problem and from what I've seen, not an inexpensive item to replace.

newman fulltimer wrote:
a yellow coating at the burner

This, and you can smell ammonia, if it is leaking to the point of no longer cooling.

Jerry