Forum Discussion

Casinojunkie's avatar
Casinojunkie
Explorer
Jan 18, 2016

Installing new "D" weather stripping on slidewout

Am in pursuit of information on the correct way to clean and install new 'D' shaped weather stripping.

Have purchased new white "D" shaped weather stripping which is about 1" wide and high. Has the self sealing tape to stick on slide.

I need to know how to remove the old weather stripping.
I have used a razor blade and removed the weather stripping but still have the cellophane and glue sticking to the slide. How does this come off? Do I need to apply heat and alcohol, or what?
Thank you for your input.
  • jajefmly's avatar
    jajefmly
    Explorer
    Jan 18, 2016
    I would try mineral spirits in a small area!
    Call the weatherstrip company, I'm sure they can help!
  • Tin_Pusher's avatar
    Tin_Pusher
    Explorer II
    Jan 18, 2016
    Might try some GooGone, it works pretty well, again try a small area first.
  • JW_of_Opechee_S's avatar
    JW_of_Opechee_S
    Explorer
    Jan 19, 2016
    I did mine two days ago. Got as much of the old off as possible with sharp scraper and spray bottle with Acetone. I didn't get it all but applied the new D seal and it stuck perfectly, no problem.
  • Casinojunkie's avatar
    Casinojunkie
    Explorer
    Jan 21, 2016
    Tin Pusher wrote:
    Might try some GooGone, it works pretty well, again try a small area first.

    Razor blade and Goo-Gone is doing the trick.
    Going to wash area with car soap then let dry.
    When dry will clean area with alcohol before attempting it install new weather stripping.
    Thanks to all.

About Fifth Wheel Group

19,006 PostsLatest Activity: Jan 13, 2025