IS IT ME OR CAMPING WORLD
I need to get my 5th wheel raised to match my new truck. So I went to Camping World this afternoon to see about having it done. My RV is a Sunnybrook that has factory holes in the spring hangers for ...
Forum Discussion
So an axle flip adds about 5.5"! Jack plates (different holes in spring mounts) are normally at 2" Spacing. If your springs are in the top holes(those closer to the frame rails) then moving to the first lower hole raise the rig 2" at the axles and 2.5-2.75" at the rear.
So the question is how far do you need to go up?
On our Cardinal we did flip the axles, and then lowered it 2" on the spring mounts for a net increase of 3.5" to get it to ride level.
From your profile:
2016 FORD F350 SD LARIAT 4x4
2001 Sunny Brook 27RKS 5th Wheel
You may need the 5.5".
There is also the subframe addition way of lifting a trailer. You may however be looking for new steps with 4 treads.
Chris
So the question is how far do you need to go up?
On our Cardinal we did flip the axles, and then lowered it 2" on the spring mounts for a net increase of 3.5" to get it to ride level.
From your profile:
2016 FORD F350 SD LARIAT 4x4
2001 Sunny Brook 27RKS 5th Wheel
You may need the 5.5".
There is also the subframe addition way of lifting a trailer. You may however be looking for new steps with 4 treads.
Chris
