shalomtoday wrote:
Thanks for the replies. Yes we have the slider bar. We now see that this setup is going to be noiser. Should have done our home work. But the space where the king pin sits appears to be too large. Our concern there is so much banging in that area it puts a lot of shock load on the truck and trailer. Can this be safe over time on these units? Sure is great to have access to all the information seasoned rvers have learned!!!
We used to have the same hitch. With all the clunking & banging the retaining bar slowly bent to where it no longer connected solidly where it locks in. Over time the sliding bar will also develop a groove where the pin contacts it, causing even more noise.
We switched over to Lil Rocker hitch, much nicer. I did fit into the rails from the old hitch.