Levelling on uneven ground
It has occurred to me that if I was to set the front electric leveling jacks with one touching the ground and the other a few inches from touching, the touching side would begin to level the unit from...
Forum Discussion
I agree with 2-MTnesters, don't want to warp your frame. Bad things for the slideouts when you do that.
Your concern about the pin not lining up correctly is valid. That's the justification for a 4 way hitch head that has a few degrees tilt side to side.
Your concern about the pin not lining up correctly is valid. That's the justification for a 4 way hitch head that has a few degrees tilt side to side.
