Lippert Frame Failures
I have a 37 ft 2005 Keystone Copper Canyon Sprinter. The part of the trailer frame that the pin box bolts to is breaking away from the rest of the trailer frame. The frame is manufactured by Lippert...
Forum Discussion
My original post was about Lippert frame failures. So how about keeping the responses applicable to the topic.
I don't care how many repair departments say they haven't seen any Lippert frame issues. Mine is literally tearing apart. The part of the trailer frame that the pin box bolts to is breaking away from the rest of the trailer frame. I can see 4 broken welds each about 4 inches in length. Broken welds at this critical juncture in the frame are an indication of poor design, engineering, workmanship, or a combination of the three.
I have two concerns. First, have other people had similar issues and what did they do about it to get it fixed. Second, how many more units are out there with similar problems.
And just for the record, I don't run overloaded.
I don't care how many repair departments say they haven't seen any Lippert frame issues. Mine is literally tearing apart. The part of the trailer frame that the pin box bolts to is breaking away from the rest of the trailer frame. I can see 4 broken welds each about 4 inches in length. Broken welds at this critical juncture in the frame are an indication of poor design, engineering, workmanship, or a combination of the three.
I have two concerns. First, have other people had similar issues and what did they do about it to get it fixed. Second, how many more units are out there with similar problems.
And just for the record, I don't run overloaded.
