B.O. Plenty wrote:
Junk all of the complete brake assemblies and start all over from the backing plates out. They only cost around $50-75 per wheel. Then scrap all the wiring and replace it with new. You have an old trailer, why waste a buch of time on it when you can just replace it all for not much money..
B.O.
X2 to this,
This is my late winter early spring project! While my brake assemblies are in good shape, I plan on replacing all the brake wiring, with heaver gauge and all soldered connections.
I will be doing this and adding a real set of backup lights to the 5er.
