Proper kingpin height for hitching
Looking for any tricks for getting the upper coupler plate the right height for hitching up. Currently doing it by myself I eyeball it after dropping the tailgate, back in some then get out of the tru...
Forum Discussion
it's easy keep thing just snug back under with trailer level pin plate should hit the back incline and shove the truck down.so back up until the front of the kingpin hits the back portion of the plate at level.
once tightened up and hooked on you should have 6" s of clearance to the bedrails
once tightened up and hooked on you should have 6" s of clearance to the bedrails
