Proper kingpin height for hitching
Looking for any tricks for getting the upper coupler plate the right height for hitching up. Currently doing it by myself I eyeball it after dropping the tailgate, back in some then get out of the tru...
Forum Discussion
When unhooking, do you folks NOT raise the FW to just separate the 2 coupler plates before pulling forward? Seems if you measured, or set a bubble level, at this point it would be high when reconnecting.
After thinking about it, I'd get out and recheck the height before connecting irregardless of the measurement method used.
After thinking about it, I'd get out and recheck the height before connecting irregardless of the measurement method used.
