Pullrite Super 5th Hitch and Lube Plate
Does anyone who uses a Pullrite Super 5th (not the slider hitch) use a lube plate between the pin box and the face plate of the hitch? We are moving to the Super 5th from a Superglide because of a di...
Forum Discussion
phillyg wrote:
Strange to get different answers. The PR setup uses a capture plate on your pinbox that locks the box to the pivot mechanism on the hitch. There is no movement there requiring a lube plate since the pivot is at the PR hitch assembly. That pivot assembly requires a variety of lubes, different depending on your PR type and model year.
And this is why I say follow your manual for your hitch.
Not all pullrites are sliding hitches, and the OP clearly states in his first post his is not.
