Njmurvin wrote:
2001400ex wrote:
I used the Andersen in my 08 Duramax and now my 2020 Denali. I only have one trip about 50 miles away and it handled well, still a little more bucking than I prefer but not bad. My clearance is good with the funnel "backwards" meaning the pin box is closer to the cab. I haven't tried to go 90 degrees but it's made the clearance for what I need it to.
Interesting. I finished my break in and took it out for a longer test drive (about 20 mile r/t) up and down a small grade to see how it towed. I have the hitch and adapter both in the "standard" locations for the maximum offset (moving the trailer 9" back). I have a very similar truck to yours (towing wise) and didn't notice any abnormal bucking. I have the Z71 package with the off-road shocks. Maybe those stabilize the bucking sooner? Could be a difference in trailers. Mine is 12k lbs fully loaded.
I'm taking a trip next week to the mountains for a real test. I'll update this thread if anything changes.
Yeah the bucking wasn't bad in any way. Just more than I prefer, more just bouncing on highway joists and such. Probably completely normal. I've been debating getting the Gen Y goose pin box. More to eliminate the 5 minutes if taking i the hitch in and out.
