Power cord connections melting
I have been having problems with my connections getting hot and melting the plastic plugs. This mostly happens at my 50 amp to 30 amp pigtail going into the camper. I have replace the power cord con...
Forum Discussion
Ha Well the reason for the dog bone is I never thought of eliminating it. LOL Seriously though the dog bone i use has a 90* angle so there is less pressure on the trailer 50 amp connection. Probably doesn't make any difference in reality. It was just my thought. There are a ton of them out there without it.
The problem still exists at the 30 amp side of the cord. If the problem is loose connectors then the connector to the dogbone will burn the new cable. Or potentially. Idono
The problem still exists at the 30 amp side of the cord. If the problem is loose connectors then the connector to the dogbone will burn the new cable. Or potentially. Idono
