Forum Discussion
lar5camping
Oct 02, 2013Explorer
Chock the 5er's wheels.
Lower (extend) the 5er landing gear so kingpin is in the middle.
(no trailer weight on hitch plate)
Put the truck in Park gear.
Release the truck's parking brake.
The tow vehicle will move either forward or backward
a tiny bit and remove any binding on the kingpin.
At this point, you can set the parking break again.
Pull the jaw release handle and drive away!
Don't forget to unplug the power cord from the truck. :)
Lower (extend) the 5er landing gear so kingpin is in the middle.
(no trailer weight on hitch plate)
Put the truck in Park gear.
Release the truck's parking brake.
The tow vehicle will move either forward or backward
a tiny bit and remove any binding on the kingpin.
At this point, you can set the parking break again.
Pull the jaw release handle and drive away!
Don't forget to unplug the power cord from the truck. :)
About Fifth Wheel Group
19,010 PostsLatest Activity: Mar 31, 2025