What did you do to your Toy Hauler today???
This is always a fun thread to watch so I thought I would start one here.
Forum Discussion
I believe I installed the EMS after the transfer switch to protect the trailer from both generator and shore power. The hardest part was working with the thick wire, #2 I think.
The disc brake conversion can easily be done in a weekend. I ran the hard brake line along the passenger side on the outside of the frame and then up through the passenger side propane compartment and into the front compartment where I mounted the pump. You have to run new wire, #12 I believe, from the pin box back to the pump. I bought my kit from stop your trailer. The owner, Bill, is very helpful with any questions you may have. I had a couple for him.
The disc brake conversion can easily be done in a weekend. I ran the hard brake line along the passenger side on the outside of the frame and then up through the passenger side propane compartment and into the front compartment where I mounted the pump. You have to run new wire, #12 I believe, from the pin box back to the pump. I bought my kit from stop your trailer. The owner, Bill, is very helpful with any questions you may have. I had a couple for him.
