rear Lippert stabilizers
Have a 2007 Jayco Designer and the rear stabilizers will not go down. When I push the extend switch it humms and then clicks off. Thought maybe the motor was shot so tried to remove it. The problem is...
Forum Discussion
Old-Biscuit wrote:
Motor humms then clicks off cause stabilizers are jammed closed and overload on motor trips it.
Go under trailer and unbind the jacks (stuck inside mounted track)
Have someone operate them manually (use crank rod on opposite side of motor) while you use a screw driver to unbind them.
This is almost exactly what I had to do this past June with my Lippert rear stabilizers. They'd engage, but immediately quit.
I took everything apart and finally had to force the stabilizers manually. I used spray lube twice for them to work properly.
