rear stabilizer jack placement question
Need to replace my rear manual stabilizer jacks. My old ones were on the rear bumper. I want to move them closer to the rear axle on the frame but only by a foot or two and turn them at an angel. Woul...
Forum Discussion
Old Duck wrote:
I have seen many late medel trailers mounted on an angle and have wondered if it was a good benefit to do so. I'm no engineer so done have a clue. I don't think I would put any on the rear bumper mainly concerned about ripping them off against something. Our 5er is a 33' rear kitchen with the rear stabilizers mounted about 18" or so from the rear of the unit.
That's why I have to replace them, rubbed them on the ground on a late arrival at the campground. So I figured I would move them off them bumper and about 18" forward. I do think I will mount them at a 45. The mounting plate is big and round so I will have plenty of room.
