Forum Discussion
Cummins12V98
Sep 24, 2018Explorer III
Me Again wrote:rsgs wrote:
For towing, I run my fronts at 65# and the rears at 70#. When not towing, I run the fronts at 55# and the rears at 50#. I add the extra air in front to make up for the weight of the diesel. Excellent ride when not towing.
So you only put the heavier diesel engine in when towing? Couple trips to the scales will show the front axle weight varies very little, between towing and not towing.
YUP, even with my 5,750+- pin I add less than 200# to my steer axle even with my hitch full forward. I leave my fronts at 80psi all the time on my DRW.
About Fifth Wheel Group
19,006 PostsLatest Activity: Jan 29, 2025