Set up advice
Well getting closer to my purchase of a 5th wheel. My cousin got a great deal on a pull rite hitch, and gave me the plates that came with it. ( his plates are in good condition and the pull rite simpl...
Forum Discussion
Coach-man wrote:
Thanks everyone for your responses, I did not realize that the 06 Dodge had the wiring harness for a controller, that sounds like that part of the setup will be very easy, same with the extension for the 7-pin harness! Again thank you!
None of the really good aftermarket controllers are made anymore. BrakeSmart, MaxBrake and Jordan. The Prodigy is a compromise that you may have to make. If so they will have a plug and play vehicle cable that goes from the controller to the vehicle mating plug, which makes installation a breeze.
There is one other higher end controller that you can research:
http://store.mrtruck.net/servlet/Categories?category=MaxBrake&sfs=f904724e
Regarding the hitch installation. You need the kit that bolts around the frame rails as Dodge recommends to not weld or drill the frame rails.
Chris
