Shock absorber problems anyone?
Last year I had a shock upper mount break off the frame taking out the rear axle brakes. I now have a shock severely bent along with its lower mount on the spring plate. The shocks are the Monroe 5550...
Forum Discussion
Jerry B wrote:
The distance between the trailers shock mounting holes is about 12.5 in. I believe this maxes out the 555001. Do I need much shock travel in the rebound?
I cross referenced the stock shocks by compressing and extending one of the existing ones and at the time that is what other MS owners were using.
Bad axle is fully extended in pic. I am also in the lowest spring hanger hole.
