Slide Out help needed on Grand Junction
Hello all. My wife and I just purchased a 2007 Grand Junction 34TRG with three slides, but only two of them are functioning. Both the bedroom and living room slides work like a champ, but the large ...
Forum Discussion
If the coupling/shear pin is OK, check the slideout motor/gear reduction drive (assuming it's an electric, not a hydraulic, slideout). Is the output shaft turning when the motor is getting power? If not, it could be that you have some gear teeth sheared off in the gear reduction unit.
Been there, done that, got the t-shirt.
Rusty
Been there, done that, got the t-shirt.
Rusty
