pursuit1 wrote:
Have a new 2013 Keystone Alpine. Slide outs will not come out. Have done the following:
1. Confirmed battery is fully charged (12.2 v)
2. Tried another battery - same result
3. Plugged into shore power - same result
4. Replaced three slide fuses - same result
5. Replace two in line fuses - same result
Any one have any further suggestions, other than a warranty call to the dealer.
Thanks
The most common failures of electric slides failure to operate that I have seen has been a safety interlock or bad connections at the slide controller.. With the bad connections at the slide controller being the most common...
Incidentally at 12.2 your battery is only about 35% charged a fully charged battery should be 12.6.
Do not know what the minimum voltage your slide will operate at but 12.2 is more than likely below the threshold..
When you get the problem sorted out..Let us know what the fix was..
JohnnyT