Slide seals
Have any of you replaced the top sweep seal or any seals on your slide(s)? I've watched a few videos and it doesn't seem to difficult but wanted to see if anyone had first hand experience. Tha...
Forum Discussion
I just replaced the "D" seal above that. It was fairly easy. They stapled the ends, I pulled them out then with a razor knife, cut along the silicone line on top and pulled it out. Installing it I just slid it on from the end and pulled it across. It was about 12 feet.
While this isnt the "wiper" seal that you mention, perhaps the technique is the similar.
Happy Trails
While this isnt the "wiper" seal that you mention, perhaps the technique is the similar.
Happy Trails
