Thor/Heartland buys out DRV

TXiceman wrote:

kakampers wrote:

TXiceman wrote:
1/8" gap in the crown molding is totally unacceptable. Our 2013 HH Champagne has no gaps and it does not have a Lippert frame.

Ken

Our Landmark has no gaps either...but does have a Lippert frame as does the DRV...your point?

Sloppy trim work is not acceptable from any manufacturer, especially the ones claiming to be full-time units. we have looked at the Big Horn and Landmark units and were not impressed with the overall quality.

Sloppy welds which I have seen on many Lippert frames are generally an indication of poor quality frames.

My point is gaps in trim or welding is not acceptable. NuWa tried Lippert frames for a short time and had lots of problems and went back to the Young's Welding he had used in the past.

Ken

That's funny...one of the first dealers we looked at years ago carried Nuwa....we looked at several on the lot. Trim laying on the floor, cabinet edges unfinished, etc. Never looked at the frames...we'd seen enough inside and left....guess they all can have a bad day or two...