Tire Wear Question
I have a Seismic 355W and I picked it up from storage today. I was underneath just checking stuff and notice cupping on the edge of my tires. Both sides. Left front is the worst, with significant cupp...
Forum Discussion
thd wrote:
..... I have about 1/16th of an inch gap on the front edge of the front tire on both sides. Looks like a very slight toe in and even on both sides. The link said less than 1/8th of an inch is ok.
.......
My experience with cars is that 1/32nd each side (1/16 total) is where this has to be to avoid tire wear problems. I don't know if that applies to trailers, but I would think it would.
