Tow Tuff Chocks

corvettekent wrote:
.....I made my own.

Here is the instructions for Home made wheel chocks.


When i made mine, instead of using all-thread I bought a 4' piece of 1/2" black iron pipe that was threaded on both ends. I drilled 1" holes in the center of the 4X4, cut the iron pipe in half, then used Wood Workers Pipe Clamps to hold the pipe to the wood chocks. Also, on the thread end of the pipe clamp I drilled a hole in the flat section and used a stainless screw to hold it to the wood.

KJ