Toyhauler bumper pull for polaris ranger
Downsizing from my class C. I have a polaris ranger and am interested in a unit with a front queen , bumper pull . Onboard genie and as short as possible. Rage'n looks nice. Have to start somewhe...
Forum Discussion
I have a 2006 Fleetwood Gearbox 220FB that my 2013 Polaris Ranger fits in. It fills the space in the trailer, that's for sure.
I pull in with a 2017 F-350, but an F-250 would do it too. I would NOT pull this trailer with a 1/2 ton truck.
Here's my CAT Scale sheet. The ATV with 4 tire chains, 1/3 tank of fuel, spare tire and 9500 lb winch on cradle was in the garage. I had about 5 gallons of fuel in the generator tank and the 30 lb propane tanks were less than half full. The fresh water tank had about 40 gallons and the black/grey tanks each had probably 25 gallons. I had about 600 lbs of camping gear in the truck bed and cab. The Andersen WDH was in use. The trailer probably had 40 lbs of mud on the underside.
The trailer has an 11K GVWR, so I'm pleased with the weight.
I pull in with a 2017 F-350, but an F-250 would do it too. I would NOT pull this trailer with a 1/2 ton truck.
Here's my CAT Scale sheet. The ATV with 4 tire chains, 1/3 tank of fuel, spare tire and 9500 lb winch on cradle was in the garage. I had about 5 gallons of fuel in the generator tank and the 30 lb propane tanks were less than half full. The fresh water tank had about 40 gallons and the black/grey tanks each had probably 25 gallons. I had about 600 lbs of camping gear in the truck bed and cab. The Andersen WDH was in use. The trailer probably had 40 lbs of mud on the underside.
The trailer has an 11K GVWR, so I'm pleased with the weight.
