Jerry B wrote:
My Sealand 210 toilet has been a PIA since new. The water/flush mechanism gets stiff and the ball valve won't close all the way. This Sealand is bolted to the flange with two bolts/nuts and two lag bolts into the floor near the rear of the toilet. I bought a new Thetford 310 which we liked but it needs an adaptor to fit my 4" flange. Anyone installed a replacement? What kind of adapter do I need? Wonder why my MS has a 4" to 3" flange??
I'm willing to bet your two screws that hold your spring cartridge are too tight. Mine has been trouble free since I adjusted it properly.
