Wast Valve Repair
My gray water #1 tank valve on my 5th wheel trailer would not close. I dismantled the valve and found the tank drain pipe blocked with construction debris (plastic shavings, etc. that had built up ove...
Forum Discussion
Jerry, I am a firm believer in not trying to fix valves. If I have to work on one, the first thing I do is get a new Valterra assembly.
If the fit is tight between the flanges that can be a bear on the install. Last time i concocted a method using wood to pry it apart and hold it there (just barely far enough) to slip the new one in without disturbing the gaskets.
Good luck.
If the fit is tight between the flanges that can be a bear on the install. Last time i concocted a method using wood to pry it apart and hold it there (just barely far enough) to slip the new one in without disturbing the gaskets.
Good luck.
