What did you do to your Toy Hauler today???
This is always a fun thread to watch so I thought I would start one here.
Forum Discussion
Finally got some pis of my compressor install. It's been in there for over a year but had the propane tanks out to fix the jack so thought I'd snap a couple of photos.
Here's the compressor as it sits, note the unistrut on the bottom that spans the TH frame, regular strut nuts are used to bolt it down. You can't see it but there's a duplex outlet on the bulkhead between the compressor and generator that's wired into the generator so anytime its plugged in and the generator is running I have air. Might change that so its connected to shore power also.
Here you can see a detail of how it's piped. I used a regular plumbing S.S. flex line to connect the tank to the PVC, then ran one pipe to each side plus the front with quick disconnects.
Here's the compressor as it sits, note the unistrut on the bottom that spans the TH frame, regular strut nuts are used to bolt it down. You can't see it but there's a duplex outlet on the bulkhead between the compressor and generator that's wired into the generator so anytime its plugged in and the generator is running I have air. Might change that so its connected to shore power also.
Here you can see a detail of how it's piped. I used a regular plumbing S.S. flex line to connect the tank to the PVC, then ran one pipe to each side plus the front with quick disconnects.
