What did you do to your Toy Hauler today???

Installed new TV + 3 inches. Original lasted two seasons.....
Picked one with small stand which I could leave installed so I can take outside if needed.

ok So I took the big plunge. I added a Go Power extreme solar and inverter kit to the Voltage 3905! I already had 4 - 6 volts so this should keep me off the grid for a while. I wish i could say I did the work myself but the wife talked me out of it. Thank God!!!

Did a round of "fixin", I seem to be needing more and more of that as the trailer ages (10+ years). Some repairs to Al. siding that came loose, not positive why. Stainless steel screws, washers, staples on the edge of a window and 40 year door/window caulk, a little white paint and it's done and looks good.

Also had to replace a stainless steel anchor that sheared on one side of the stairs, most likely from a washboard road. There was another hole there to use, so I did. No more flex in the steps. My local Ace hardware has all the stainless hardware that I have needed on hand.

My legend on my fuse panel was all screwed up. Several were wrong and some didn't make sense. This is what it looked like:


I used Excel and made a new legend after verifying each fuse. It now looks like this:

I topped off my batteries. The 3 Group 24's took a total of 1/2 gallon. It was 8 months since last checked. Then I ran a equalize charge.

joebedford wrote:
Our bathroom wall behind the sink is curved. Will the peel N stick take a curve?

Yup. Its flexible and adheres well.

Our bathroom wall behind the sink is curved. Will the peel N stick take a curve?

nayther wrote:

eDUBz wrote:
Thanks, I got it at Lowes its smart tiles peel n stick. I also did the kitchen backsplash you can see it on the previous page. :)

I took a look at this stuff last night, seems pretty easy to do, what did you cut it with for a straight edge? Thinking about trying it for the little spot above my bathroom sink first to see if I like it, will only tank two or three squares.

A pair of scissors. Since they are stagger just follow the first rectangle piece up every other piece. So everyother rectangle you will be cutting in half.

eDUBz wrote:
Thanks, I got it at Lowes its smart tiles peel n stick. I also did the kitchen backsplash you can see it on the previous page. :)

I took a look at this stuff last night, seems pretty easy to do, what did you cut it with for a straight edge? Thinking about trying it for the little spot above my bathroom sink first to see if I like it, will only tank two or three squares.

Added fastway break away trailer cable - added a fuse block for the added accsesories what's cool about is it has small led lights next to the fuses and it lights up to let you know what fuse is blown. - mounted a Usb outlet with built in switch. I got this idea from RvCircus and he mentioned on the YouTube video that there's a light that stays on in the USB plugs. So instead of adding a switch I surfed Amazon for a couple of hours and found this USB outlet used for motorcycles. The usb comes with a round handle bar mount I just tossed it out. And because I have 3 strand of blue led lights I decided to run one underneath the counter the kids dig and it's pretty cool when we're hanging out late night with the rear ramp down. That's it for today:C